Description: Its bright laser cross makes this cross-line laser with green laser technology the laser of choice for precise alignment of horizontals, verticals and slopes. It also projects two side points and two plumb points that are characterised by an especially high degree of visibility and that are at a 90° angle to each other. This enables efficient plumb lining, even in very high rooms. Markings can be easily transferred from wall to wall with the side laser points, for example, when painting, aligning wooden panels or installing electrics. The clamping and wall bracket allows the laser to be hung up or attached to metallic surfaces or ceiling profiles. The vernier adjustment mechanism enables precise vertical adjustment of the laser lines to edges.

Accurate horizontal and vertical alignment of objects

Good visibility through green laser technology

4 Point Projection: Laser points top, bottom and at the side in 90° configuration for exact marking transfer from wall to wall

Plumb function for synchronous working on floor and ceiling

Especially bright plumb points for use in buildings with high rooms

Magnetic clamp and wall bracket for hanging, horizontal and vertical clamping to profiles, and attaching to metallic surfaces

MicroControl: Vernier adjustment mechanism for precise vertical adjustment of the laser lines to edges and adjusting screw to adapt the bracket to different profile thicknesses

Easy alignment of slopes with manual tilt function

Reliable measurement through automatic power off with ADS tilt

Individually switchable laser lines

Time-saving automatic alignment

Long operating life due to powerful HighCapacityPack with lithium-ion technology

Can be recharged via the USB-C interface and USB-A to USB-C cable

Attachment to tripods via 1/4” thread on the laser or 5/8” thread on the clamping and wall bracket

Integrated handheld receiver mode for outdoor applications and long ranges

IP 64: Well protected against dust, perfect for use in harsh working conditions

Technical Data	031.420A MasterCross-Laser XPG
Title	Cross-line laser
Horizontal/vertical levelling	✅
Manual slope function	✅
Plumb laser (up/down)	✅
Laser points (left/right)	✅
Replaceable battery system	✅
Hand receiver mode	✅
Tilt warning function	✅
Levelling	automatic
Tripod Connection	1/4" / 5/8" thread
Accuracy	± 0.2 mm / m
Self-Levelling Range	± 2.5°
Visibility (Typical)*	55 m
Length of Receiver Unit	0 mm
Laser	1H1V 4P
Laser Wavelength	515 nm
Plumb Laser Wavelength	515 nm
Laser Class	2 / < 1 mW (EN 60825-1:2014/A11:2021 / EN 50689:2021)
Protection Class	IP 64
Power Supply	Li-ion battery pack 7.4V / 2.6Ah / 19.24Wh
Operating Time	approx. 8 hours
Battery Recharging Time	approx. 4 hours
Temperature (Working Conditions)	0°C … 50°C

Scope of delivery: 

MasterCross-Laser XPG

CrossGrip Plus

HighCapacityPack (Li-Ion)

network/charging device incl. international adapter

USB-C-cable

carrying case

Documentation:

Instructions
Instructions part 2
Instructions part 3

Categorie:
Cross- and line lasers